MultiTech Cellular Gateway

Activation

1. Connect power to the gateway. The Status indicator will change to green while the device is powering up.

2. After a few minutes the LoRa indicator will change to solid green. The Status and Cell indicators will flash briefly during normal activity. Your gateway is now ready for use.

Reset

In the event your device is offline or you need to reset it, please follow these steps.

1. Disconnect power from the gateway and then wait several seconds.

2. Reconnect power to the gateway. The Status indicator will change to green while the device is powering up.

3. After a few minutes the LoRa indicator will change to solid green. The Status and Cell indicators will flash briefly during normal activity. Your gateway is now ready for use.

Please allow up to 10 minutes for the gateway to boot up and connect to the cellular network after powering it back on