GlobalSat CO/CO₂

The Globalsat CO sensor is an IoT-ready environmental sensor that measures carbon monoxide (CO) concentration along with ambient temperature and humidity. Typical measurement range is up to ~500 ppm CO, making it suitable for monitoring air quality in areas like parking garages, basements, kitchens, and industrial spaces where CO buildup can occur.

The Globalsat CO₂ sensor measures carbon dioxide (CO₂) levels along with temperature and humidity. With a typical measurement range up to ~10,000 ppm CO₂, it’s well-suited for monitoring indoor air quality in schools, offices, greenhouses, and other occupied or controlled spaces. 

Activation

Use the following instructions to setup your CO or CO₂ device.

1. Connect antenna to the sensor.

2. Connect power to the sensor using the included USB cable and power adapter.

3. After a moment the device will power on and the LCD will initialize.

4. The sensor is now ready for use.

Reset

In the event your device is offline or you need to reset it, please follow these steps.

1. Disconnect power from the sensor.

2. Wait several seconds and then reconnect power to the sensor. After a moment the device will power on and the LCD will initialize.

3. The sensor is now ready for use.