Milesight UC500 Solenoid Valve Controller
The Valve Controller must be opened and turned on in order to activate the device.
Power On Device
Power On/Off | Action | LED Status |
|---|---|---|
Power On | Press and hold power button. | Light is off then turn bright green to indicate power on. |
Power Off | Press and hold power button. | Light is on and turns off to indicate power off. |
Power Check | Quickly press power button. | Green light visible = on No light visible = off |
Connecting Solenoid & Electrical Valve Wires
Color | Solenoid Valve | Electrical Valve |
|---|---|---|
ORANGE (see picture) | DC | 12v/9v/5v OUT1 |
RED (see picture) | DC | 12v/9v/5v OUT2 |
BLACK | GND | GND |
WHITE | GPIO | GPIO |
Controlling Valve via App
Once your Solenoid Valve & Electrical Valve wires are connected, power on the device to activate the sensor in the App and control the open/close status of each valve.